Laser cladding repair service with iLam®509C

Single pass cladding, cross section metallographic, dense internal structure of cladding layer, forming metallurgical bond with matrix。

H13 hot work tool steel coating

The single layer overlaps, the cladding structure is good and dense, no pores and cracks, and its hardness is about 47HRC after testing.

General cladding equipment print sample 1, cobalt-based WC alloy pick


General cladding equipment print sample 2, nickel-based alloy turbine blade sample



General cladding equipment print sample 3, stainless steel wall sample

In terms of design, iLam® 509C series equipment is composed of three-axis (expandable fourth and fifth-axis) motion system, self-developed automatic powder feeder, laser head, nozzle, motion control system, water cooler, laser and other parts.

Features

1.Using linear module, high motion accuracy, stable dynamic performance, compact structure and good maintainability;

2. The linear motion axis and laser head are above the machine tool, and the load remains unchanged, while avoiding dust interference;

3. Large space on the workbench, which can place large parts to be repaired, and can also replace large turntables or positioners;

4. Motion control, laser, powder feeder, etc. all adopt centralized program control with high integration;

5.Using PC high-performance numerical control system, user interface is more friendly than traditional machine tool panel;

6. Field bus is used for communication between main equipment, with high integration and low failure probability;

7. Depending on the application, it can be equipped with auxiliary equipment such as visual positioning and induction preheating.

Equipment Accessories

Intelligent

Laser cladding closed loop feedback control system:

1. Higher molding dimensional accuracy

2. More stable process

3. Zero failure rate

4. Reduce process development cycle

Multifunction

Part repair

2. Direct molding (3D printing)

3. Material and process development

4. Laser power can be freely configured

5.3-axis or 5-axis motion control system

6. Can be used as an assembly line workstation

Cost-effective

1. All parts are homemade or domestic

2. Highly integrated system

3.Excellent industrial design appearance

4. Dedicated custom software

5.Various process packages and accessories

6. Very competitive price advantage